UMAREX ELITE FORCE AIRSOFT GREEN GAS 8OZ CAN - 2 PACK Online Only Deal!Save $0.50 per can when purchasing a 2 pack.Elite Force Green Gas is a pressurized gas used to power airsoft gas magazines and gas powered grenades. Airsoft green gas is propane with a silicone based oil added to the green gas which lubricates O-rings and seals inside airsoft gas powered products preventing them from drying out and leaking. Green gas delivers approximately 115 psi at 70-degrees Fahrenheit, and the cans are DOT approved. These also feature an integrated safety valve to release pressure automatically and reduce explosion risk whenever the pressure exceeds a safety level due to temperature or other reasons.Click or Tap 'Learn More' below for more information FILL DIRECTIONS Invert can and make sure charging nozzle is perpendicular to the valve stem. Press nozzle into Mag for 2-3 seconds. Repeat as necessary until Mag is full. Valve misalignment will cause gas leak when charging and result in an inadequate charge. PRODUCT WARNINGS DO NOT PUNCTURE. DO NOT LEAVE CANISTER IN TRUNK OR VEHICLE. DO NOT EXPOSE TO HEAT, SPARKS AND OPEN FLAME. DO NOT LEAVE IN DIRECT SUNLIGHT. DO NOT STORE AT TEMPERATURES ABOVE 120F (49C). SPECIFICATIONS Manufacturer: Elite Force Quantity: 2 Cans Pressure at 50 F: 80 PSI Pressure at 60 F: 93 PSI Pressure at 70 F: 109 PSI Pressure at 80 F: 122 PSI Pressure at 90 F: 156 PSI Pressure at 100 F: 175 PSI Weight: 8 oz (per can) UMAREX ELITE FORCE AIRSOFT GREEN GAS 8OZ CAN - 2 PACK Online Only Deal! Save $0.50 per can when purchasing a 2 pack. Elite Force Green Gas is a pressurized gas uséd to power airsoft gas magazines and gas powered grenades. Airsoft green gas is propane with a silicone based oil added to the green gas which lubricates O-rings and seals inside airsoft gas powered products preventing them from drying out and leaking. Green gas delivers approximately 115 psi at 70-degrees Fahrenheit, and the cans are DOT approved. These also feature an integrated safety valve to release pressure automatically and reduce explosion risk whenever the pressure exceeds a safety level due to temperature or other reasons. Click or Tap 'Learn More' below for more information FILL DIRECTIONS
Invert can and make sure charging nozzle is perpendicular to the valve stem.
Press nozzle into Mag for 2-3 seconds.
Repeat as necessary until Mag is full.
Valve misalignment will cause gas leak when charging and result in an inadequate charge.